Critical Advice on Turning Off Your Water Supply Due to a Burst Pipe

Critical Advice on Turning Off Your Water Supply Due to a Burst Pipe

Blog Article

Book Now

On this page below you will find a bunch of helpful tips when it comes to Steps to Take When a Pipe Bursts.

You need to understand just how to shut off your major water line if you struggle with a burst pipeline. Do not wait for a plumbing emergency prior to figuring out how to get this done. Besides, aside from emergency leakages, you will need to shut off your major water shutoff for plumbing repairs or if you leave for a long trip. Learn even more concerning it in this mini guide.

Why Must You Shut the Main Line Off?

Familiarizing yourself with exactly how your mainline switches on as well as off can save you during an emergency. For instance, when a pipe all of a sudden bursts in your house, you'll be besieged with panic. Therefore, you can readily shut the shutoff off and also protect against much more damage if you know what to do. In addition, closing this off ensures you do not need to handle a sudden flooding in your house.
On top of that, closing and also opening up the shutoffs from time to time ensures they don't get stuck. It is also the best time for you to examine for rust or various other damaged links. In addition, make it a point to enlighten various other family members on what to do. This makes regular maintenance as well as managing emergencies a lot easier. You can possibly save on your own thousands of dollars out of commission.

Where is This Primary Valve Situated?

The main water line supply can vary, so you might require to find time to find out where it is. However, when your house is getting soaked due to a ruptured pipeline, you do not have the deluxe of time throughout an emergency. Thus, you must get ready for this plumbing circumstance by finding out where the shutoff is located.
This shutoff valve could resemble a ball valve (with a lever-type deal with) or a gateway valve (with a circle spigot). Positioning depends on the age of your home as well as the climate in your area. Check the adhering to typical spots:

Inside of House: In chillier environments, the city supply pipelines run into your residence. Inspect common energy areas like your cellar, utility room, or garage. A most likely place is near the hot water heater. In the basement, this shutoff will certainly be at your eye degree. On the other primary floors, you might require to bend down to discover it.

Outdoors on the Exterior Wall: The major valve is outside the home in exotic climates where they don't experience winter. It is usually connected to an exterior wall surface. Look for it near an outdoor faucet.

Outdoors by the Road: If you can not locate the shutoff anywhere else, it is time to check your road. It could be outside next to your water meter. It could be below the gain access to panel near the ground on your street. You might need a meter key that's marketed in hardware shops to remove the panel cover. You can find two valves, one for city usage and also one for your residence. See to it you turned off the ideal one. As well as you will recognize that you did when none of the taps in your home launch freshwater.

Must This Always Be Shut down?

Aside from emergencies, repairs, or long trips, you may not require to turn off the primary shutoff. As an example, if only one component has concerns, you can shut off the branch valve in that area. This way, you can still utilize water in various other parts of the house. For finest outcomes, call a trustworthy plumber for emergencies.

Water Pipe Burst: 6 Steps You Need to Take Now

Why Did My Water Pipe Burst?

There are many reasons why a water pipe fails. While each situation is different, there are a few common causes of water pipe bursts, from weather to external damage.

Let’s look at five culprits, and the steps to take to prevent issues.

Freezing Temperatures

If you live in a climate where temperatures drop below freezing, be aware of the heightened potential for pipe problems.

When temperatures drop, the water inside your pipes may turn to ice. As more water trickles in, the frozen area grows… and the frozen water expands.

Over time, the pressure may be too much. Bonds in the pipe weaken and cracks form. When the ice finally melts, the temperature change can shatter both the ice and the surrounding pipe. If the pressure is strong enough, the pipe bursts.

To keep pipes from freezing and bursting, shut off the water to outdoor spigots and drain the remaining water from pipes. Insulate indoor pipes to keep them warm.

If pipes are on an outer wall, open cabinets if possible. When it’s freezing outside, leave at least one faucet slowly dripping to keep the water moving inside the pipes at all times.

If the temperature gets well below freezing and even into the negatives, you may want to leave a steady stream of water flowing. A water bill that’s a little bit higher will likely be much cheaper than flooding repairs.

Rust and Corrosion

Corrosion is another common cause of burst pipes. Rust and corrosion build up inside pipes, especially in older homes and in areas where water has a high iron content.

Over time, the corrosion weakens pipes, leading to an increased chance of a burst. Steel pipes are especially susceptible to rust.

To prevent rust and corrosion, replace steel pipes with plastic or copper. These types of pipes tend to resist corrosion longer.

Tree Roots

When trees around your home grow taller, their roots grow downward and outward, too. Sometimes, roots come in contact with water pipes.

In a battle between tree roots and pipes, the roots usually win. As roots continue to grow and press against the pipes, the pipes crack, leading to leaks.

To keep roots from encroaching, be sure to plant trees far from your water pipes. Choose slow-growing tree varieties that have small root balls.

If trees are already encroaching, you may try to add a physical or chemical barrier to prevent roots from accessing pipes.

Movement and Water Pressure

Sometimes, the soil around pipes shifts or moves, causing pipes to lose stability and crack. Movement may occur due to nearby construction, temperature fluctuations, or repairs made to other parts of the plumbing system.

High water pressure may also cause pipes to move. If the pressure reaches a PSI above 60, pipes may simply burst from the strain.

Construction is a major cause of pipe movement. Request that dirt from nearby construction isn’t dumped on top of your pipe system to prevent movement and increase pressure.

Clogs

You already know that clogs can back up your sink and shower drains. But did you know that they can lead to burst pipes, too? A clog can cause water pressure to build up behind it, especially if it’s deep within the system.

That’s why it’s important to be mindful of what gets poured down the drain, goes into the garbage disposal, and flushed down the toilet. Limiting drains to water and approved materials can help prevent deep clogs.

Signs of a Busted Water Pipe

How do you know if you have a burst water pipe? The most obvious sign is finding puddles of water in your home.

However, puddles can come from leaks, rather than bursts. Here’s how to tell the difference.

If a puddle gets bigger when you turn the water on, that indicates a burst pipe. Because bursts allow water to move through the walls, you may notice water puddling directly under the burst pipe, and also pooling in other places.

For instance, if the pipe leading to the bathroom sink bursts, you may see puddles under the sink and on the floor near the tub and toilet. In contrast, leaks tend to pool in just one place.

Another sign of a burst pipe? Water pressure issues. Burst pipes generally lead to low water pressure, as the cracked area affects how much water moves through the pipes.

Stains may appear on the walls and floors near a busted water pipe. If bursts are caused by rust, you may notice that water has a strange, metallic odor and reddish discoloration. The presence of mold or mildew may also indicate a burst water pipe.

First Steps to Take When a Water Pipe Bursts

Locate your main water valve and shut it down to prevent any more water from flowing into your walls and home. Your main shut-off may be in your basement, crawl space, or by your hot water heater. (If you think water has come in contact with electrical sockets, wiring, or a fuse box, turn your electricity off, too).

Drain your faucets. Starting with the cold tap, drain the remaining water out of the pipes, then flush every toilet in the house a few times. Next, turn off your boiler or water heater and drain the hot tap. This will relieve water pressure.

Call the plumber once the water is turned off and pressure is relieved. Getting professional help quickly is key.

Try to find the burst pipe. If you can find the leak, place a bucket under it to catch the water. Look for bulges in the ceiling or other signs of water damage.

Document the damage. You may need to make an insurance claim, so document thoroughly. Take close-up photos of damaged items and areas, and of the pipes themselves. Use rulers in pictures to show water levels. Take photos from different angles; the more documentation you have, the better. You may even want to take a video of the leak before you shut off the water main.

Clean up the mess. If water sits too long, microbes will grow, leading to harmful mold and mildew. This can lead to long-term damage, so get your home dry as soon as possible. You may need to call in a professional drying company, as simply opening the windows and turning on fans may not be enough.

https://www.homego.com/blog/water-pipe-burst/

I am very involved in and I'm hoping you enjoyed reading my page. Don't hesitate to set aside a second to share this post if you appreciated it. Many thanks for going through it.

Prevent further damage.

Report this page